一、问题背景
没事谁折腾这鬼玩意哦。。。还不是因为bug。
我们的应用，用户头像是存在ftp上的。之前的ftp服务器是一台windows，我们后台服务器程序收到用户上传头像的请求时，会用一个ROOT/ROOT的账户，连接ftp服务器。
获取到连接后，即进行上传。
上传：上传文件则存放在ROOT用户的home 目录（在windows上装的是server-U来充当ftp服务器，所以就是在Server-U里面配置了ROOT用户的home目录）。
上传完成后，会得到一个ftp协议类型的url。范例如：
ftp://10.10.20.2/userphoto/user7.png。
客户端拿到该url后，即用ftp客户端的库连接该url，获取到文件流，下载下来，进行展示。
这两天，ftp服务器从windows变到了redhat上。今天下午，测试突然报了个bug过来，说是用户头像不能正常展示了。what？于是开始查找问题。
梳理了半天，发现问题在于：linux上的ftp服务器，采用的是vsftpd软件。因为配置文件没配好的原因，利用前面的“ftp://10.10.20.2/userphoto/user7.png”就访问不到图片。
为什么说没配好呢，一开始报的错是：FTP 550 Failed to change directory
于是按照下面博文里的进行修改：https://blog.csdn.net/coreyC/article/details/80866533
没想到一波三折。
二、以为改好了，结果不能匿名访问
按照上面的博客进行了修改，最后关闭了匿名访问。
结果关掉了，果然，获取图片开始出问题了。因为客户端以前都是不需要输入用户名、密码，直接就能访问的。结果现在服务端关闭匿名访问后，要求输入用户名、密码了。
于是前端出错。
于是就开了允许匿名访问，结果一开了，就报了其他的错。
折腾了很久，我这里先把正确的配置贴一份：
# Example config file /etc/vsftpd/vsftpd.conf## The default compiled in settings are fairly paranoid. This sample file# loosens things up a bit, to make the ftp daemon more usable.# Please see vsftpd.conf.5 for all compiled in defaults.## READ THIS: This example file is NOT an exhaustive list of vsftpd options.# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd‘s# capabilities.## Allow anonymous FTP? (Beware - allowed by default if you comment this out).
# 这里需要打开，允许匿名访问anonymous_enable=YES## Uncomment this to allow local users to log in.
# 之前说到我们用ROOT/ROOT来访问ftp，我们这里，ROOT/ROOT是我们的linux可以登录的用户名密码。要允许这类用户访问ftp，需要开启下面的选项local_enable=YES## Uncomment this to enable any form of FTP write command.
# 要允许写入操作。否则应该不能上传文件write_enable=YES## Default umask for local users is 077. You may wish to change this to 022,# if your users expect that (022 is used by most other ftpd‘s)local_umask=022## Uncomment this to allow the anonymous FTP user to upload files. This only# has an effect if the above global write enable is activated. Also, you will# obviously need to create a directory writable by the FTP user.
# 匿名上传，我们也是开了的。为了把匿名访问弄起来，我们真是折腾了各个选项配置anon_upload_enable=YES## Uncomment this if you want the anonymous FTP user to be able to create# new directories.
# 允许匿名创建目录anon_mkdir_write_enable=YESanon_other_write_enable=YES## Activate directory messages - messages given to remote users when they# go into a certain directory.dirmessage_enable=YES## The target log file can be vsftpd_log_file or xferlog_file.# This depends on setting xferlog_std_format parameterxferlog_enable=YES## Make sure PORT transfer connections originate from port 20 (ftp-data).connect_from_port_20=YES## If you want, you can arrange for uploaded anonymous files to be owned by# a different user. Note! Using "root" for uploaded files is not# recommended!#chown_uploads=YES#chown_username=whoever## The name of log file when xferlog_enable=YES and xferlog_std_format=YES# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log#xferlog_file=/var/log/xferlog## Switches between logging into vsftpd_log_file and xferlog_file files.# NO writes to vsftpd_log_file, YES to xferlog_filexferlog_std_format=YES## You may change the default value for timing out an idle session.#idle_session_timeout=600## You may change the default value for timing out a data connection.#data_connection_timeout=120## It is recommended that you define on your system a unique user which the# ftp server can use as a totally isolated and unprivileged user.#nopriv_user=ftpsecure## Enable this and the server will recognise asynchronous ABOR requests. Not# recommended for security (the code is non-trivial). Not enabling it,# however, may confuse older FTP clients.#async_abor_enable=YES## By default the server will pretend to allow ASCII mode but in fact ignore# the request. Turn on the below options to have the server actually do ASCII# mangling on files when in ASCII mode.# Beware that on some FTP servers, ASCII support allows a denial of service# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd# predicted this attack and has always been safe, reporting the size of the# raw file.# ASCII mangling is a horrible feature of the protocol.#ascii_upload_enable=YES#ascii_download_enable=YES## You may fully customise the login banner string:#ftpd_banner=Welcome to blah FTP service.## You may specify a file of disallowed anonymous e-mail addresses. Apparently# useful for combatting certain DoS attacks.#deny_email_enable=YES# (default follows)#banned_email_file=/etc/vsftpd/banned_emails## You may specify an explicit list of local users to chroot() to their home# directory. If chroot_local_user is YES, then this list becomes a list of# users to NOT chroot().#chroot_local_user=YES#chroot_list_enable=YES# (default follows)#chroot_list_file=/etc/vsftpd/chroot_list## You may activate the "-R" option to the builtin ls. This is disabled by# default to avoid remote users being able to cause excessive I/O on large# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume# the presence of the "-R" option, so there is a strong case for enabling it.#ls_recurse_enable=YES## When "listen" directive is enabled, vsftpd runs in standalone mode and# listens on IPv4 sockets. This directive cannot be used in conjunction# with the listen_ipv6 directive.listen=YES## This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6# sockets, you must run two copies of vsftpd with two configuration files.# Make sure, that one of the listen options is commented !!#listen_ipv6=YESpam_service_name=vsftpduserlist_enable=YEStcp_wrappers=YES
#匿名用户的根目录。这个非常重要anon_root=/home/ROOT
#匿名用户不要密码就靠这个no_anon_password=YES
#本地用户，如我们上传用的用户（ROOT/ROOT）的根目录。当然，我们给匿名配了那么多，估计匿名也能上传了。local_root=/home/ROOT
#该选项暂时不太清楚ftp_username=ROOT
三、以为这样就好了？还没完
按上面配置后，匿名用户可以访问了没？并不行。
在winscp（包含ftp客户端功能）上，用匿名用户连接试试。（输入主机名后，点击匿名访问，会自动填写用户名密码等）
结果报错了。
500 OOPS: vsftpd: refusing to run with writable anonymous root
于是又面向百度查了一把，找到了下面的博客：
https://www.cnblogs.com/xiaofengkang/archive/2012/03/28/2422111.html
照着操作了一把后，再用上面的客户端进行匿名访问。ok了。
Linux上的ftp服务器vsftpd之配置满天飞--设置匿名用户访问(不弹出用户名密码框）以及其他用户可正常上传
原文地址：https://www.cnblogs.com/grey-wolf/p/9878539.html