CCNA Ethernet Channel 实验

发布时间：2023-09-06 01:52责任编辑：傅花花关键词：暂无标签

auto是被动，desireable是主动

acive是主动，passive是被动，不同厂商建议配置ON

SW1(config)#int range f0/1-2

SW1(config-if-range)#channel-group ?

<1-6> Channel group number

SW1(config-if-range)#channel-group 1

% Incomplete command.

SW1(config-if-range)#channel-group ?

<1-6> Channel group number

SW1(config-if-range)#channel-group 1 mo

SW1(config-if-range)#channel-group 1 mode ?

active Enable LACP unconditionally

auto Enable PAgP only if a PAgP device is detected

desirable Enable PAgP unconditionally

on Enable Etherchannel only

passive Enable LACP only if a LACP device is detected

SW1(config-if-range)#channel-group 1 mode on

SW1(config-if-range)#

Creating a port-channel interface Port-channel 1

%LINK-5-CHANGED: Interface Port-channel 1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Port-channel 1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

SW2(config-if-range)#channel-group 1 mode on

SW2(config-if-range)#